Yes. Propel Accelerator works well with Internet Explorer 5.0 or later. No changes are necessary for Internet Explorer to work with Propel Accelerator. However if you cannot surf after you installed or uninstalled Propel Accelerator follow the steps below to make sure the IE browser is configured correctly.

Cannot surf after installing Propel Accelerator?
1. Click on the small blue propeller icon and select Options, then click on the Advanced... button write down the port number. Click cancel.

2. From Internet Explorer select Tools -> Internet Options. Then click on the Connections tab. Select the connection you are using. Click Settings...

3. Make sure that the "Use a proxy server for this connection" checkbox is checked. If not, do so. Then click the Advanced... button.

4. Make sure that the proxy address for HTTP port address is set to "localhost" (no quotes) and the port is set to the port number found in step one. Click OK. Now test.

5.You can verify that Propel Accelerator is working when:
The Propel Accelerator icon (blue propeller near the system clock) shows moving arrows when you browse the Internet.

Cannot surf after uninstalling Propel Accelerator?
1. From Internet Explorer select Tools -> Internet Options. Then click on the Connections tab. Select the connection you are using. Click Settings...

2. Make sure that the "Use a proxy server for this connection" checkbox is not checked.